R22 Air Cooled Scroll Modular Chiller/ 130 Modular chiller/modular chiller
130 Modular Chiller/Modular Chiller 36ton-295ton R22 Air Cooled Scroll Chiller
Cooling capacity: 130÷1040 kW
Heating capacity: 140÷1120 kW
|Supplyability||1000 sets per month|
|Payment||50% T/T as deposit rest before delivery|
|Packaging||Export Standard Package|
1.130 modular chiller The master module can work independently or together with up to 7 slave modules, capacity from 130 to 1040kW.
2. Air cooled modular chiller units with W type heat exchanger: panels, frame and base are made from galvanized steel protected with polyester powder painting to ensure total resistance to atmospheric agents.
3. Modular scroll chiller 3-phase scroll type compressor, with built-in thermal overload cut-out and crankcase heater, mounted on rubber vibration dampers.
4. External rotor type axial fans, equipped with three phase direct drive motors, low noise 8 poles, protection level IP54, provided with a protective outlet grille.
5. Evaporator built with high efficiency tube in tube type heat exchanger, factory insulated with flexible close cell material.
6. Condenser built with seamless internal screw thread copper tubes mechanically expanded into blue wave hydrophilic aluminum fins.
7. R22 scroll modular chiller Refrigerant circuit complete with charge valves, filter drier, sight glass, gas-liquid separator, thermostatic expansion valve, high & low pressure switch. The heat pump unit is completed also with 4-way valve, liquid receiver and one way valve.
8. Hydraulic circuit built with galvanized pipe, complete with water discharge connection for tube in tube heat exchanger and flange type hydraulic connectors in two directions easy for connections from both sides of the units.
9. Packaged modular chiller Electric panel consist of: Compressor contactor, fan motor contactor, compressor protection breaker, fan protection breaker, phase sequence relay and microprocessor with function display (display only for master/packaged unit)
10.Automatic operation dramatically reducing maintenance cost thanks to reliable microprocessor system.
¨ Paddle flow switch;
¨ Metallic filter for hydraulic circuit;
¨ Water pump;
¨ Rubber antivibration mounting.
AC+LS QW R F C 130 M
Hermetic scroll compressor
R: heat pump
- : cooling only
M: master module
S: slave module
Cooling power input*
Heating power input**
0-25-50-75-100 (Single unit)
Water side pressure drop ***
<<<- - -
- - ->>>
2400 (Single unit)
1200 (Single unit)
2315 (Single unit)
* Ambient temperature 35ºC; evaporator water in/out 12/7 ºC;
** Ambient temperature DB 7 ºC, WB 6 ºC; condenser water in/out temperature 40/45 ºC;
*** In the nominal water flow condition the pressure drop is between this range.
**** Sound pressure measured at a distance of1mand a height of1.5 mabove the ground in a dear field (fan side).
130 modular chiller