Scroll Mini Chiller/Air cooled scroll chiller R410A
Scroll Mini Chiller /Air cooled Scroll Chiller with Axial Fans, Scroll Compressors, Water Pump and Storage Tank 1.5Ton -5.5Ton R410A air cooled scroll chiller
Cooling capacity: 5.8÷26.3 kW
Heating capacity: 6.3÷31.2 kW
|Supplyability||1000 sets per month|
|Payment||50% T/T as deposit rest before delivery|
|Packaging||Export Standard Package|
Scroll mini chiller
Air cooled scroll chiller /Mini chiller Panels and base frame are made from galvanized steel protected with polyester powder painting to ensure total resistance to atmospheric agents.
Scroll Chiller with Single phase (mod.05÷10) compressors, 3-phase scroll compressor (mod.12.5÷30), with thermal overload cut-out and crankcase heater mounted on rubber vibration isolators.
Models 7÷10 are available also with 3-phase scroll compressor and mod.12.5 with single phase scroll compressor.
Air cooled chiller External rotor type axial fans, equipped with single phase direct drive motors, low noise 6 poles, protection level IP54, provided with a protective outlet grille.
R410A chiller High efficiency stainless steel brazed plate heat exchanger, factory insulated with flexible close cell material.
Coils are consisting of seamless copper tubes mechanically expanded into blue hydrophilic aluminum fins, protected with flexible plastic grill.
Air to water chiller with Copper tube connection with charge valve, filter drier (filter for 05÷8.5), gas-liquid separator, thermostatic expansion valve (expansion capillary tubes for mod. 05÷8.5), low pressure switch with automatic reset, high pressure switch with manual reset.
The heat pump unit is completed also with 4-way valve, liquid receiver and one way valve.
Vertical chiller Built with air vent valve, water drain connection, water circuit safety valve, water pump, male-threaded hydraulic connectors and inertial water storage tank.
Water pump contactor;
Compressor protection breaker;
Water pump protection breaker
Fan motor protection breaker;
Control circuit protection breaker;
Phase sequence relay (only for 3-phase power supplied units);
Fan speed regulator (Optional);Programmable microprocessor controller;
* Ambient temperature 35ºC; evaporator water in/out 12/7 ºC;
** Ambient temperature DB 7 ºC, WB 6 ºC; condenser water in/out temperature 40/45 ºC;
*** Sound pressure measured at a distance of1mand a height of1.5 mabove the ground in a dear field (fan side).