60 Modular Type Air Source Heat pump modular heat pump
60 Modular Type Air source Water Heat pump/Modular Heat pump 17ton-147ton R22 modular heat pump
Cooling capacity: 65÷520 kW
Heating capacity: 70÷560 kW
|Supplyability||1000 sets per month|
|Payment||50% as deposit rest before delivery|
|Port||Tianjin or other port of China|
|Packaging||Export standard package|
60 Modular heat pump The master module heat pump can work independently or together with up to 7 slave modules, capacity from 65 to 520kW.
Air source modular units with V type heat exchanger: panels, frame and base are made from galvanized steel protected with polyester powder painting to ensure total resistance to atmospheric agents.
Air source water heat pump Units with U type heat exchanger: bearing structure in aluminum, panels in stainless steel, and base in painted section steel.
Scroll heat pump 3-phase scroll type compressor, with built-in thermal overload cut-out and crankcase heater, mounted on rubber vibration dampers.
External rotor type axial fans, equipped with three phase direct drive motors, low noise 8 poles, protection level IP54, provided with a protective outlet grille.
Evaporator built with high efficiency tube in tube type heat exchanger, factory insulated with flexible close cell material.
Condenser built with seamless copper tubes mechanically expanded into blue hydrophilic aluminum fins.
R22 modular heat pump Refrigerant circuit complete with charge valves, filter drier, sight glass, gas-liquid separator, thermostatic expansion valve, high & low pressure switch. The heat pump unit is completed also with 4-way valve, liquid receiver and one way valve.
Modular water heat pump Hydraulic circuit built with galvanized pipe, complete with water discharge connection for tube in tube heat exchanger and flange type hydraulic connectors in two directions easy for connections from both sides of the units.
Electric panel consist of: compressor contactor, fan motor contactor, compressor protection breaker, fan protection breaker, phase sequence relay and microprocessor with function display (display only for master/packaged unit)
Automatic operation dramatically reducing maintenance cost thanks to reliable microprocessor system.
¨ Paddle flow switch;
¨ Metallic filter for hydraulic circuit;
¨ Water pump;
¨ Rubber antivibration mounting.
¨ Heat recovery functions
AC+LS QW R F C 60 U M
1、Water heat pump
2、Hermetic scroll compressor
3、 Unit type:
R : heat pump
-- : cooling only4、 Air source
C: R407c6、 Size
7、Finned heat exchanger type
V: V type coil
M: master module
S: slave moduleP: packaged type
* Ambient temperature 35ºC; evaporator water in/out 12/7 ºC;
** Ambient temperature DB 7 ºC, WB 6 ºC; condenser water in/out temperature 40/45 ºC;
*** In the nominal water flow condition the pressure drop is between this range.
**** Sound pressure measured at a distance of1mand a height of1.5 mabove the ground in a dear field.
modular heat pump